IBM laptop battery-We supply Brand New laptop battery at lower prices. Welcome to buy replacement laptop battery for IBM , IBM laptop battery . The IBM laptop battery come with 1 year warranty and fast delivery.

Useful Tips about IBM laptop battery

What should you do to keep your IBM laptop battery healthy?

1) Battery packs should be charged for 12 hours when you first get them.IBM laptop battery completely discharged at the time of purchase, and need a full charge before their first use.
2) For daily use, charge the battery to full, then run it on battery power only until it is completely out if using Ni-Cd or Ni-MH IBM laptop battery (to prevent the iˇămemory effectiˇŔ) or mostly out for Li-ion (to prevent overcharging).
3) Do not leave your battery inactive for extended periods of time. Even if you use AC power most of the time, use the IBM laptop battery periodically to keep it in good condition. Unplug your AC adapter when the computer is not in use to prevent overcharging.

Use IBM battery need pay attention to some matters:

1. Carefulnessly read narrate book of battery,use commendatory battery.
2. Research whether the electric appliance and the IBM laptop battery contact elements is whether clean, when necessity clean with the wet cloth mop, after dry loads according to the correct polar direction.
3. When non-adult custody, don't let the child replace the battery, compact battery like AAA should be placed at somewhere the child can't attain.
4. Don't mix up new and old batteries or put different model batteries together.
5. Don't try to make IBM battery rebirth use of hotting up, charging,or other way.
6. Don't let battery short circuit.
7. Don't hot up laptop battery or loss it in water.
8. Don't strip battery.
9. Electro-adapter should be cut switch after use.
10. IBM battery shoud be take off from adapter when it is long time no use .
11. Battery should be stocked in cool and dry places.

Claims of fast charging a Li-ion IBM laptop battery in one hour or less usually results in lower charge levels. Such a charger simply eliminates stage two and goes directly into 'ready' once the voltage threshold is reached at the end of stage one. The charge level at this point is about 70%. The topping charge typically takes twice as long as the initial charge. Depending on the charger and the self discharge of the IBM battery, a topping charge may be implemented once every 500 hours or 20 days. Typically, the charge kicks in when the open terminal voltage drops to 4.05 volts per cell and turns off when it reaches 4.20V/cell. No trickle charge is applied because the Li-ion laptop battery for IBM is unable to absorb overcharge. Trickle charge could cause plating of metallic lithium, a condition that makes the cell unstable. Instead, a brief topping charge is applied to compensate for the small amount of self-discharge the IBM battery and its protective circuit consume.