MAKITA 1822 power tool battery-We supply Brand New power tool battery at lower prices. Welcome to buy replacement power tool battery for MAKITA 1822, MAKITA 1822 power tool battery . The MAKITA 1822 power tool battery come with 1 year warranty and fast delivery.

Replacement power tool battery for MAKITA 1822

All prices are for one (1) unit.
This is special designed for MAKITA 1822 . If you are not satisfied with our products for any reason, please don't hesitate to contact us, we will reply you within 24 hours.
Not fits tools:6343DWAE,5620DWA,ML180

Brand New with 1 Year Warranty

This Power Tool Battery is specially designed for following parts and fitting models.Please ensure the product(s) that you are going to buy fits the brand, model and part number of your device.

This power tool battery can replace the following part numbers :

This power tool battery is also compatible with the following models :

MAKITA power tool battery Articles & Tips

A new MAKITA power tool battery comes in a discharged condition and must be charged before use (refer to the devices manual for charging instructions). Upon initial use (or after a prolonged storage period) the digital camcorder MAKITA 1822 may require three to four charge/discharge cycles before achieving maximum capacity. New MAKITA 1822 needs to be fully charged and discharged (cycled) a few times before it can condition to full capacity. Rechargeable batteries undergo self-discharging when left unused. Always store a power tool battery pack in a fully charged staged for storage.When charging the MAKITA 1822 for the first time the device may indicate that charging is complete after just 10 or 15 minutes. This is a normal phenomenon with rechargeable batteries. Remove the camcorder batteries from the device, reinsert it and repeat the charging procedure

It is important to condition (fully discharge and then fully charge) the MAKITA 1822 every two to three weeks. Failure to do so may significantly shorten the battery's life (this does not apply to Li-ion batteries, which do not require conditioning). To discharge, simply run the device under the battery's power until it shuts down or until you get a low battery warning. Then recharge the battery as instructed in the user's manual. If the battery will not be in use for a month or longer, it is recommended that MAKITA 1822 be removed from the device and stored in a cool, dry, clean place.

Invest in a good charger for your camcorder. Ni-MH batteries should not be charged in a NiCad charger, unless the charger is specifically made for both chemistries. There are cheap chargers and there are expensive chargers. Make sure the charger you get has good reviews and is well made. Chargers with micro-controller chips are usually the best choice of your digital camcorder.

Be sure to store your power tool battery properly. Do not leave your batteries in a hot car, or in humid conditions. The best storage conditions are a cool, dry place. The refrigerator is fine if you stick in a packet of silica gel with your MAKITA 1822 in a sealed bag to keep them dry. It is a good idea to charge your NiCad or Ni-MH batteries fully before use if they have been in storage.

Upgrade my MAKITA power tool battery From Ni-MH to Li-ion

NiCad, Ni-MH and Li-ion MAKITA power tool battery is all fundamentally different from one another and cannot be substituted unless the has been pre-configured from the manufacturer to accept more than one type of battery chemistry. Please refer to your manual to find out which rechargeable battery types the laptop device supports or use our MAKITA Battery Finder above to find all the compatible power tool battery for your device. It will automatically list all of the battery chemistries supported by your specific device. If your device does allow you to upgrade the battery from Ni-MH to Li-ion, you will typically get longer run time.

For example, if your uses a NI-MH battery that is 9.6 Volts, 4000mAh and the new Li-ion power tool battery is 14.4 Volt, 3600mAh, then you will obtain longer run time with the Li-ion battery.

Example:

Li-ion: 14.4 Volts x 3.6 Amperes = 51.84 Watt Hours
Ni-MH: 9.6 Volts x 4 Amperes = 38.4 Watt Hours
The Li-ion is stronger and has longer run time.

How Can I Maximize the performance of My MAKITA power tool battery?

There are several steps you can take to help you get maximum performance from your power tool battery:

Prevent the Memory Effect - Keep the power tool battery healthy by fully charging and then fully discharging it at least once every two to three weeks. Exceptions to the rule are Li-ion batteries which do not suffer from the memory effect.

Keep the MAKITA power tool battery Clean - It's a good idea to clean dirty battery contacts with a cotton swab and alcohol. This helps maintain a good connection between the battery and the portable device.

Exercise the Battery - Do not leave the battery dormant for long periods of time. We recommend using the battery at least once every two to three weeks. If an power tool battery has not been used for a long period of time, perform the new battery break in procedure described above.

Battery Storage - If you don't plan on using the power tool battery for a month or more, store it in a clean, dry, cool place away from heat and metal objects. NiCad, Ni-MH and Li-ion batteries will self-discharge during storage; remember to recharge the batteries before use.

Understanding Your MAKITA Battery Needs

We strive to make you power tool battery purchases easy. Since we understand that finding the right batteries for your needs can be overwhelming and confusing at times we developed an power tool battery finder tool to help find the right size for the make and model of your equipment. We also offer educational articles and tips to help you conserve your batteries and understand common problems. By us providing education you are able to make the right purchasing decisions as well as provide proper care for all of your electronics.